Quick Answer: Can You Use A Sprayer With Thompson’S Water Seal?

Can you use Thompson Water Seal in a paint sprayer?

All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck.

You can apply some products with a garden sprayer or paint roller, but for classic deck stain, a paint pad on an extension pole is best..

Can you thin out Thompson Water Seal?

Accordingly, can you thin Thompson Water Seal? The old-timer came up with a similar formula in 3 parts linseed oil, 2 parts Thompson’s Water Seal cut with 1 part paint thinner. The paint thinner acts as a penetrating agent, making the mixture thin enough so that the active ingredients penetrate the wood.

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

What is Thompson’s Water Seal used for?

Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.

Can you use a sprayer to seal a deck?

You can even use a garden sprayer to apply the sealant. No fuss, no muss. It’s the quickest and cleanest way to get sealer down on the main surface deck, but it offers the least control for application in those hard to reach areas. Remember to cover nearby foliage to protect them getting sprayed with sealant.

Can I use a garden sprayer to apply concrete sealer?

Yes, you can use a standard pump garden sprayer to apply your sealant. … Since solvent-based sealers have more active chemicals and corrosive agents, they are not recommended for garden sprayers. But if you’re using a water-based sealer, you can use the same sprayer you use for fertilizer and insecticide.

How long does Thompson’s Water Seal take to cure?

2 hoursDRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you’re coating. Remove as much product as possible from equipment before cleaning.

Is it better to roll or spray concrete sealer?

“Certain sealers are better applied by spray because they are not formulated for rolling,” says Dean Owen, president of Arizona Polymer Flooring Inc. in Glendale, Ariz. “This is usually a function of the solvents used in the formulation. Slow-evaporating solvents are better for rolling.

What’s the best way to apply concrete sealer?

Here’s a step-by-step summary of how to seal concrete:Remove all oil, grease, stains, dirt, and dust from the concrete.Strip any existing sealer from the surface.Open up the concrete with an etching solution.Apply a thin coat of sealer using a roller or sprayer.Wait for the first layer of sealer to dry.More items…

What is the best way to apply Thompson’s Water Seal?

Surfaces must be thoroughly cleaned prior to application with a deck cleaner (like those in the Thompson’s® WaterSeal® cleaner line) applied according to label directions and cautions. If surface is damp or wet from cleaning or weather, allow the surface to dry thoroughly (a minimum of 48 hours) before application.

Is Thompson’s Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

How many coats does Thompson’s Water Seal have?

Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

How many coats of sealer can you put on concrete?

Two coatsHow many coats should I apply? Two coats are always suggested because the first coat of any concrete sealer is usually absorbed into the concrete at different rates leaving the substrate unevenly sealed. A second coat will ensure proper even coverage.

Does Thompson Water Sealer go bad?

Asphalt sealer and crack filler, if stored above freezing, will be good for a year (opened or unopened). PVC primer and Thompson’s Water Seal™, sealed tightly, can be kept indefinitely (no minimum temperature), as can concrete bonding additive if stored above freezing.